Home of the Roadwing Harness

Roadwing Electrical Harness


Hi I'm Gonzo! Godfather of the Roadwing, a Honda Goldwing GL1800 rear shock with an electric over hydraulic preload adjustment, modified to fit the under sprung Road Star 1700. Here is the place to learn more about the electrical harness you need to make it all work. I am the sole provider of this harness though I provided the wiring diagram years ago for those of you that want to make your own. Refer to Tykes page for the original write-up at :

https://tykesplace.com/yamaha-roadstar/roadwing/

There are probably over 600 Road Stars converted to this shock now. It is a 200lb increase over stock spring rate coupled with Honda's premiere bike's top of the line actuator. Your bike will handle like its on rails once you've completed the install, and being able to adjust the preload at the flick of a switch is miles better than jacking up your bike and making 1/4" turns of a nut when you add a passenger or gear. No more frame bashing either. 



The harness has two relays for the up and down actuation, is fully loomed and connects to Honda's stock connector. All that is needed to install is to connect the fuse to the Battery (+), ground to the frame, mount the switch where you want it and plug into the Roadwing shock. Done. The switch is on a 48" lead so it can be installed into a fairing. Others have installed theirs in the side cover, under the tank, in the fuel pump cover, in the neck of the bike for ideas.

The Roadwing harness is $48 and $8.45 shipping USPS with tracking in the continental U.S. I have been shipping on Fridays but may be able to ship sooner during the Summer months. I build per order.

Paypal to GonzoCJ5@yahoo.com

Mounting the Shock

Many people have questions regarding mounting the shock on an already tight bike. Remove your right side cover and pull the two relays off the frame bracket and move them to the right. Slide the Roadwing motor in behind that bracket and down. Use a cable tie to strap the pump to the bracket and dress your relays in. Done. 



Comments

  1. Morning!!! You still making the harnesses for roadstars

    ReplyDelete
    Replies
    1. Sure do! Shipped about 10 this month already!

      Delete
    2. Well let’s do buisness

      Delete
  2. Do I do it under friends and family on PayPal like with Bill Kingsley

    ReplyDelete
  3. I’d like to order … do I do so under family and friends in PayPal like I did for the Roadwing with Bill Kingsley?

    ReplyDelete
    Replies
    1. Sorry. Busy day today. You can do friends and family, it saves me a few bucks, or just PayPal, I’ll get it either way. You can use the link on this site of PayPal directly to Gonzocj5@yahoo.com. I build to order on all my harnesses. I ship each week.

      Delete
  4. No worries so if I order tonight you ship next Friday?

    ReplyDelete
  5. I just sent payment

    My name is
    Rod waterton
    Shipping
    250 H st
    Blaine WA
    98230

    ReplyDelete
  6. If I’m out of work on time I ship any day of the week that I have shipments to make. Otherwise Saturday mornings.

    ReplyDelete
    Replies
    1. Thanks
      Did you receive my payment and Blaine WA shipping address?

      Delete
    2. My name is Mike mcdonagh I ordered a wiring harness for the gold wing shock. Do you know when you are going to be sending it out

      Delete
  7. How I do to order this harnes?

    ReplyDelete
  8. You can click on “Add to Cart” and it’ll take you to your PayPal.

    ReplyDelete
  9. Wanting to buy one this guy legit? Just making sure.

    ReplyDelete
  10. Going to send you money now on PayPal. Ship to 4997 kernan road midland ohio. Name Thomas fritz. Zip code-45148.

    ReplyDelete
  11. How do we contact about ordering a harness for the road wing

    ReplyDelete
    Replies
    1. My names Lee Dillon
      I sent the payment via PayPal should be the anikinfan@yahoo.com if you need any info or even updates just email me I Geuss

      Delete
  12. Just looking to know before making purchase of both harness and shock (from ebay) but does the shock itself need to be modified in any way or just bolt on?

    ReplyDelete
    Replies
    1. Small modifications need to be made. Replacing the eye end bushing with a bronze bushing and drilling a new hole in the aluminum clevis and removing the excess. You can read all about it here: https://www.jrbk.net/roadwing/roadwing-conversion/

      Delete
  13. I belive I order the switch set up. Do u know if it shipped yet. Mmcdonagh5164@gmail.com

    ReplyDelete
  14. I would like to order a switch for my roadwing. is this still an active site?

    ReplyDelete
    Replies
    1. Sure is. You need a replacement switch or a Roadwing Harness?

      Delete
    2. i need the harness. i already have a road wind and pump

      Delete
  15. Hey there I’m in need of a harness, give me a holler at jeeptank91@outlook.Com

    ReplyDelete
  16. Are you still making this harness?

    ReplyDelete
  17. Are you still making these?

    ReplyDelete
  18. Are you still doing these? How would I get one?

    ReplyDelete
    Replies
    1. Of course! You can click “Add to Cart” above and PayPal payment to get the ball rolling. I build per order and ship weekly.

      Delete

Post a Comment

Popular posts from this blog

Road Star Batwing Harness

Honda Shadow Electrical Light Harnesses